How to replace the lower dishwasher door seal
Remove the top and side panels
First, You must remove the top and side panels to access the hinges. To make things easier, you can also remove your baskets.
Unhook the Pulley System
The hinges will be held in tension by a pulley and spring system. These hinges must be disengaged. Close the door to release the tension. Then, using your pliers, remove the plastic covering to unhook the pulley. Then, you can repeat the process on your other side.
Remove the Door
Let’s take that door off! Be careful, as the door is heavy and can easily fall. Permanently close it properly. The kickplate must be removed before you can remove the front panel. Three screws are located on each side of the door. After unscrewing the screws, you can pull the door from the appliance.
Replace the Lower Door Seal
Be aware that the door is still attached to the hinges by wires, and you can only move it a little. It is a little to remove the plastic covering the hinges. The seal sits between the hinges of the door and the inner portion. On either side, two screws must be removed. The hinges can be placed to the side. Remove the old door seal, and then replace it (be sure to install the replacement correctly).
Put everything back together
Everything is now ready to be reassembled! This guide will help you quickly get your dishwasher back in working order. You may need to remember to reattach the hinge pulley, but this is vital for your dishwasher to open and close safely. Your lower dishwasher door seal has been replaced successfully! The dishwasher can do the heavy lifting for you now.